Westinghouse SE 6000 Manual de instalación descargar pdf (Pagina 4)

____________________________________________________________________________________________________

HID Corporation 9292 Jeronimo Road Irvine, CA 92618 USA TEL (949) 598-1600 (800) 237-7769 FAX (949) 598-1690

Web page, E-mail - www.prox.com - MultiProx Controller Installation Manual 6000-900 Rev F 4 of 27

MultiProx System Overview

The MultiProx system is designed to retrofit existing Schlage/Westinghouse Security Electronics (SE) systems

that use 2814/2815 type sensors, 708/808 type Controllers and SE774 Multiple Switch Monitors MSM(s). The

MultiProx system reads Schlage/Westinghouse (SE) Command Keys (1030, 1040, or 1050) along with HID

ProxCard II Cards. It interfaces to all host systems that have standard Wiegand electrical interfaces. The MultiProx

system uses the existing coax cable and provides monitoring input points and associated outputs that are the

functional equivalent of the SE MSM (Multiple Switch Monitor) module. The MultiProx system directly replaces the

existing SE components without major modifications to the existing mounting hardware. This includes the

mounting holes and cable locations. The MultiProx Controller replaces the SE 708(S) or 808(S), the MultiProx

Reader replaces the SE Sensors, and the MultiProx HSM (HID Switch Monitor) replaces the SE MSM.

MultiProx System Layout Diagram - Figure 1

M/N 862814/

862815

READERS

M/N 86744

HSMS

M/N 86808

MULTIPROX CONTROLLER

Wiegand and

Maximum - 8 Reader Channels

M/N 862814/

862815

M/N86744

coax*

* - existing RG/6 Coax

** - Alpha 1295 or Equivalent per channel

Access

Control

Access

Control

System

Host

NEW

SYSTEM

coax*

Wiegand Interface

Relay outputs

Reader 1 data **

HSM 1 relay outputs***

Reader 8 data **

HSM 8 relay outputs***

coax*

Panel

Channel

Channel 1

Reader

coax*

Note - HSMs are only required when input (REX/Door Sense/ Aux. inputs) wiring is local to the reader door.

*** - Alpha 1292 or Equiv. per output

pin 1) Data "0"

pin 2) Data "1"

pin 5) RED LED Control

pin 6) Beeper Control

pin 3) Data Return

pin 4) GREEN LED Control

TBW1-TBW8

TBW1

TBW8

P/N 6000ANN00

P/N 6020ANC00

P/N 5385AGB00/

5385AGS00

P/N 5385AGB00/

5385AGS00

TBR1

TBR8

Figure 1

Description/Operation

The MultiProx Controller is the center of the MultiProx system. The Controller scans the Readers for HID or

Schlage/Westinghouse (SE) access control cards, communicates with the HSMs for switch status changes and

communicates with the Reader for LED and Beeper control. When a card is read, the Controller outputs the card

data over the Wiegand interface. When a monitored contact has a status change, the Controller switches the relay

output that provides status of the HSM monitored switch that changed. See Figure 1. The Controller has a default

mode for controlling the Reader beeper and LEDs, as well as an external (Host) controlled beeper and LED option.

Parts List

1) MultiProx Controller p/n 6000ANN00 qty 1 (included)

2) This Installation Sheet p/n 6000-900 qty 1 (included)

3) RS3222 Screwdriver p/n 68-0002-01 qty 1 (included)

3) Cable, coax - RG/6 or SE 9284 As required/installed (1000 feet maximum per Reader channel)

65% shield, copper center, 18AWG

4) Cable, multi-conductor Wiegand As required (500 ft maximum per Reader channel)

5) Power Supply Requirements Linear type recommended, 20.0 - 28.5 VDC @ 2.0 Amps

1 2 3 4 5 6 7 8 9 ... 26 27

Comentarios a estos manuales

Sin comentarios

Westinghouse SE 6000 Manual de instalación Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Westinghouse SE 6000