Westinghouse SE 6000 Manual de instalación descargar pdf (Pagina 27)

____________________________________________________________________________________________________

HID Corporation 9292 Jeronimo Road Irvine, CA 92618 USA TEL (949) 598-1600 (800) 237-7769 FAX (949) 598-1690

Web page, E-mail - www.prox.com - MultiProx Controller Installation Manual 6000-900 Rev F 27 of 27

HSM model no. 6020ANC00

Operating Limits

Operating voltage range 14 - 28.5VDC Supplied by the controller

Absolute maximum voltage 28.5VDC

Current consumption 20mA

Reverse voltage protection On coax F -type input connectors

Environmental

Enclosure rating Indoor only

Enclosure None - PCB only

Weight 3 oz.

Operating temperature range -40 to 65°C (-40 to 150°F)

Storage temperature -40 to 85°C (-40 to 185°F)

Operating humidity range 5 to 95% Non-condensing

Operating vibration limit .04 G

/Hz 20 - 2000Hz

Operating shock limit 30g, 11mS half sine

Operating parameters

Connector F type PCB mount

HSM Communication speed 15 -150mS

Inputs Up to 4 - Monitors normally open or normally closed contacts

Termination resistor - 36Kohm Normally open - Resistor in parallel, normally closed - series

Note: The above are recommended installation procedures. All local, state and national electrical codes

have precedence.

1 2 ... 22 23 24 25 26 27

Sin comentarios

Westinghouse SE 6000 Manual de instalación Pagina 27